- Smart Factory
- Solutions
- Products
- About Erowa
- Shop
-
Your watch list
0
-
No articles in the watch list
-
EROWA MTS
The versatile zero-point tooling system
The EROWA MTS (Modular Tooling System) is a flexible tooling system. The maximum workpiece size is exclusively determined by the machine capacity.
Whether you require single palletization with an MTS chuck or multiple palletization with several MTS chucks or base plates – all combinations are possible.
Modular and universal clamping
MTS base plates are the flexible and precise interface for single or multiple palletization.
MTS base plates are available in various versions – with 1, 2, 4, 6 or 8 MTS chucks, depending on the model. We would also like to advise you on customized versions.
Minimizing setting-up times
Workpieces and fixtures are palletized so that they can placed on the machine when required without any further setting up. On the machine, the MTS palletizing system holds them in position with precision and stability.
Further jobs are prepared outside the machine.
Automating
The MTS system is ideally suitable for automated pallet change.
When workpieces are changed, the contact surfaces of the chucks and chucking spigots are cleaned automatically. The MTS pallets are positioned neatly and with precision.
Low construction height
The low construction height of the EROWA MTS tooling system leaves a great deal of space for workpieces.
MTS chucks are fitted to the machine table or directly integrated in it.
Making use of existing equipment
Existing vises, gauges and fixtures are equipped with chucking spigots or palletized. This immediately makes them universally integrated in the MTS system.
Making optimal use of working space
The EROWA mineral cast tombstone provides a great deal of space for the simultaneous setting up of different workpieces. The entire working space of the machine is optimally exploited through the use of a tombstone.
The various EROWA MTS zero point tooling systems at a glance
EROWA MTS 81 – small construction size, high degree of clamping power
MTS 81 is used wherever space is limited. Precise positioning of the pallets and high clamping force included.
EROWA MTS – the universal interface
The proven and versatile datum-point tooling system enables the pallet carriers to be changed within seconds with a repeat accuracy of < 0.003 mm.
The modular construction of the clamping components allows an almost unlimited combination of all components.
EROWA MTS 2.0 – to meet the toughest requirements
The zero point tooling system with forward-looking functions. Ready for Industrial 4.0. Status display in real time with highest process reliability.
The centering and compensation pins position and center the workpiece carrier with < 0.003 mm precisely in the MTS 2.0 chucks.
EROWA MTS 4.0 - The world's first datum-point tooling system with wireless digital status monitoring
For the highest level of process reliability
Integrated into the machine control system, MTS 4.0 provides comprehensive information and status displays on the condition of the MTS 4.0 chucks in real time.
MTS 4.0 meets the increased safety standard according to
ISO 13849 PLd- Cat 3.
Ready for Industry 4.0
The data signals of the MTS 4.0 chucks are sent wirelessly to a receiver integrated in the machine.
Electronic monitoring enables a completely new range of evaluation options: Proactive maintenance, precise process analysis, and extended monitoring options.
Simple control
Only two pneumatic lines are required to control the MTS 4.0 base plate: Opening and reclamping (optional: cleaning air for automation).
The power supply is autonomous via the integrated battery.